11/23/2023 0 Comments Cossacks back to war multiplayer guide![]() In my router it's under Advanced Settings -> LAN -> DHCP Server. So, back to making our local address static. To find your MAC address, go to command prompt and type in ipfconfig /all and the Physical Address of your Ethernet Adapter will be shown. To do so, you need the MAC address of your PC. If so, then you should go to your LAN settings and enable DHCP server + manual assignment. Your local IP address should be set to static if you often plug in and out the lan cable. Under "IP Address of Exposed Station" you type in your local IP address and press apply. In my Asus router I can find DMZ under Advanced Settings -> WAN -> DMZ. Second thing you should know is your local IP address. If portforwarding didn't help you, then it's the time to set up a demilitarized zone.įirst thing you should know is that not every router has dmz. Just check the off at the upper-right corner. You also can find more help on this site but watch out, it will ask you to "Portforward Network Utilities". Most routers don't require a local IP to port forward, but if this is your case, your local IP address is the ipv4 in ipconfig.Īfter adding ports, click save and reboot your router. You should port forward both ports: TCP and UDP. You may need it if you really want to play over hamachi (which i don't recommend). Then you have to port forward port range 2300-2400 (default cossacks ports), 34000-34010 (cossacks server is running on 34001) and 6667. On my Asus router it's under Advanced Settings -> WAN -> Port Forwarding.įirst you have to make sure you enable port forwarding. You should google it up or use this [site to find the default username and password.Īfter logging in, you have to find the port forwarding section. If you haven't set up your router manually, you should have the default login name and password. Go to your favourite browser and type in the IP of your router.Ī log-in page should come out, or a request to log in. ![]() Note the IP you find under the Ethernet adapter -> Default Gateway. Inside the command prompt, type ipconfig and press enter. If you want people to join your lobby, you will need to port forward.įirst you need to find out your router's IP address. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |